Application Procedures :
1. The surface to be coated must be clean, dry and free from dust, grease and loose dirt.
2. Use grinder (abbrasive cleaning) or acid etch (Cleanol-F) for pre treatment concrete surface.
3. Stir TENNOKOTE thoroughly before applying.
4. Add ±10% clean water (if necessary), in to the mixture for the first coat.
5. Apply 2-3 coats using brush or roller, allow 2 hours interval between coatings.
6. For best result, apply TENNOKOTE in cross direction against the preceding coat is recommended.
7. Protect the wet coat (within 2 hours) from rain, and estreme temperature.
8. Do not apply under direct sunlight exposure or onto very hot surfaces
| TENNOKOTE TNK-1000 WA | |
| Type | Water based acrylic |
| Color | As shown in color card |
| Finish | Doff |
| theoritical coverage | 1.5 – 2.0 m?2; /kg (200 microns / 3 coats included quartz sand) |
| Drying time | Surface dry 10 minute (30° C) Hard dry 2 hours (30° C) Ready to use 48 hours |
| Packaging | 5 kg, 22.5 kg (+ quartz sand 10%) |
| Self life | 1 year in unopened containers |
| Diluent | Clean water |
| Application method | Brush and roll |
| Cleaning | After use, wash all equipments immedietely with clean water |
