USE
Used as a protective coating for steel and wood surfaces that are not exposed to extreme corrosive conditions.
APLICATION METHOD
1. Surface Preparation All surfaces must be free of rust, grease, oil, moisture or other contaminants.
- Environmental Conditions Air temperature : 5-35℃ Relative humidity : up to 85%
- Application Equipment brush, spray, roller.
- Safety Precautions 1) Keep adequate ventilation during application. 2) Avoid contact with skin and eyes. 3) Keep away from heat and open flame. 4) Don’t mix with other paints
PHYSICAL DATA
- Surface Preparation All surfaces must be free of rust, grease, oil, moisture or other contaminants.
- Environmental Conditions Air temperature : 5-35℃ Relative humidity : up to 85%
- Application Equipment brush, spray, roller.
- Safety Precautions 1) Keep adequate ventilation during application. 2) Avoid contact with skin and eyes. 3) Keep away from heat and open flame. 4) Don’t mix with other paints.
- Finish – high gloss ,Semi gloss,Matt
- Colors… http://www.theclassypaint.com/color/ncsColor.do
- Applied over -Steel, wood (Depending on the color)
- Components – 1
- Volume solids – 34~44 %
- Recommended dry – 40㎛ film thickness
- Coats – 1 or 2
- Theoretical – 8.5~11.0m2/L(@40μD.F.T) * Allow for application losses and surface irregularities.
- Application – brush, spray,roller
- Drying time at 25℃ dry hard – 5hr to recoat – 9 hrs later
- Thinner – KSM5319 (1) enamel
- Flash point – 38℃
- Shelf life – 1 year from manufacture date when stored indoors at 5~38℃
