{"id":2665,"date":"2021-07-06T09:17:32","date_gmt":"2021-07-06T09:17:32","guid":{"rendered":"http:\/\/www.maziya.com\/?post_type=product&p=2665"},"modified":"2021-07-06T09:18:35","modified_gmt":"2021-07-06T09:18:35","slug":"nanopoxy500","status":"publish","type":"product","link":"https:\/\/www.maziya.com\/index.php\/product\/nanopoxy500\/","title":{"rendered":"NANOPOXY500"},"content":{"rendered":"

SURFACE PREPARETION<\/strong><\/p>\n

– Steel\uff1aBlast all surface in accordance with SSPC-SP10(“Near White”, SIS Sa 2 1\/2).<\/p>\n

APPLICATION EQUIPMENT<\/strong><\/p>\n

The following equipment is listed as a guide and suitable equipment from other manufacturers may be used. Adjustments of pressures and change of tip size may be needed to achieve the proper spray characteristics.<\/p>\n

\uf0b7 Airless Spray \u2013 Standard airless spray equipment, such as Graco Bulldog Hydra-spray with .021\u201d to .027\u201d tip. Air pressure: 2200 psi(150 atm).<\/p>\n

\uf0b7 Conventional Spray \u2013 Industrial spray equipment, such as DeVilbiss MBC or JGA<\/p>\n

spray gun. Separate regulators for air and fluid pressure, mechanical pot agitator and moisture and oil trap in the main air supply line is recommended.<\/p>\n

\uf0b7 Power Mixer \u2013 Mixer such as Jiffy Mixer, manufactured by Jiffy Mixer Company, Inc., San Francisco, California, Mixer must be powered by an air motor or an explosion-proof electric motor.<\/p>\n

    \n
  1. ENVIROMENTAL CONDITIONS<\/li>\n<\/ol>\n

    \uf0b7 Air temperature : 5 ~ 38\u2103, Surface temperature: 5~45\u2103<\/p>\n

    \uf0b7 The surface temperature must be at least 3\u2103 above the dew point to prevent moisture condensation.<\/p>\n

    \uf0b7 Relative humidity : up to 85%<\/p>\n

    APPLICATION PROCEDURE<\/strong><\/p>\n

    1) Clean equipment with Thinner002 before use.<\/p>\n

    2) Stir material thoroughly with explosion-proof power mixer until uniformly blended to a workable consistency.<\/p>\n

    3) Thinning is normally not required. If thinning is necessary for workability, thin with up to 3%(by volume) use Thinner002 per 18L.<\/p>\n

    4) Apply a heavy, wet coat in even parallel passes overlapping each pass 50% to avoid holidays, bare areas and pinholes.<\/p>\n

    5) Drying time to recoat : 48hours ~ 5days at 20\u2103<\/p>\n

    6) Curing time for immersion service : 5days at 20\u2103<\/p>\n

    7) Clean all equipment with Thinner002 immediately after use.<\/p>\n

    8) Use the material within pot life(20\u2103, 1hrs).<\/p>\n

      \n
    1. CAUTION<\/li>\n<\/ol>\n

      \uf0b7 Keep away from heat and open flame.<\/p>\n

      \uf0b7 Avoid contact with eyes and repeated contact with skin.<\/p>\n

      \uf0b7 Keep adequate ventilation during application.<\/p>\n

      \uf0b7 Avoid breathing of vapors or spray mist.<\/p>\n

      \uf0b7 Stir all material thoroughly before applying.<\/p>\n

      \uf0b7 Use the material within pot life.<\/p>\n

      SAFETY PRECAUTION<\/strong><\/p>\n

      1) Fire and Explosion<\/p>\n

      The majority of paints contain flammable organic solvents. As soon as a paint container is opened, solvent vapors are released. The flash point is the lowest temperature at which a liquid gives off sufficient vapor to form an inflammable mixture in contact with air;<\/p>\n

      – If the flash point of the paint is lower than or close to the temperature of the air there is a very considerable risk of explosion and fire.<\/p>\n

      – If the flash point exceeds the air temperature then there is no risk of explosion but there is still a risk of fire.<\/p>\n

      As such, therefore, no naked flames, cigarettes or matches should be allowed near and area where paint is being applied or stored. Precautions should also be taken to avoid sparks from electrical appliances or caused by metal to metal contact. If a fire involving paint does occur;<\/p>\n

      \uf0b7 Do not extinguish with water, as paint solvents float on water, as paint solvents float on water and this helps to spread fire.<\/p>\n

      \uf0b7 Use a dry chemical, foam or CO2 extinguisher.<\/p>\n

      \uf0b7 Protect yourself from the fumes with breathing apparatus.<\/p>\n

      2) Skin and Eye Contact<\/p>\n

      If paint is spilled the following precautions should be taken;<\/p>\n

      \uf0b7 Ventilate the area to remove the fumes.<\/p>\n

      \uf0b7 Mop up all spilled paint with absorbent material, ensuring that all materials used to mop up the paint disposed of in closed metal containers.<\/p>\n

      It is recommended that the following precautions should be taken to prevent paint coming into contact with the skin and eyes.<\/p>\n

      \uf0b7 Select sensible working clothes that cover as much of the body as possible.<\/p>\n

      \uf0b7 Always wear gloves and eye protection.<\/p>\n

      \uf0b7 Do not touch your mouth or eyes with yours gloves.<\/p>\n

      \uf0b7 Read and observe precautionary notices on paint containers.<\/p>\n

      \uf0b7 Eyes are particularly sensitive, so if you are splashed in the eyes, by paint of thinners, flood them immediately with fresh water for at least 10 minutes and seek medical advice immediately.<\/p>\n

      \uf0b7 If paint should splash on your skin, remove it with soap and water or an industrial cleaner, NEVER USE SOLVENT.<\/p>\n

      \uf0b7 Remember to wash hands and rinse mouth after working with paint.<\/p>\n

      \uf0b7 Despite these precautions paint can still come into contact with the skin or eyes (e.g. spray mist, excessive splashing), so a non-greasy barrier cream is recommended or all exposed skin.<\/p>\n

      Remember the objective is to avoid skin contact. If your cloths become soaked in paint change them immediately and thoroughly wash the affected garments with soap and water.<\/p>\n

      3) Inhalation<\/p>\n

      The inhalation of solvent fumes, dust, paint vapors must be avoided. Please follow the precautions listed.<\/p>\n

      \uf0b7 Ensure that ventilation is available to remove solvent fumes.<\/p>\n

      \uf0b7 If spaces are difficult to ventilate efficiently wear an aired hood\/mask.<\/p>\n

      \uf0b7 Think about where the fumes are being vented. They could affect other people in adjacent spaces.<\/p>\n

      Remember solvent fumes are heavier than air, they push breathable air upwards. They can flow down drains and ventilation ducts.<\/p>\n

      \uf0b7 If dizziness, drunkenness or headaches are experienced this could indicate you are being affected by solvent fumes. Move into fresh air and do not return until the ventilation has improved.<\/p>\n

      \uf0b7 If breathing fumes results in the collapse of a painter he should be carefully moved into fresh air and allowed to recover gradually. Forced exercise is inadvisable.<\/p>\n

      \uf0b7 Never enter a space where fumes have or could have accumulated without breathing apparatus.<\/p>\n

      Inhalation of spray mist;<\/p>\n

      \uf0b7 The mist of paint particles created when spraying should not be inhaled.<\/p>\n

      \uf0b7 In well ventilated spaces a dust cartridge respirator can filter out these particles of paint effectively. (Replace the cartridge regularly).<\/p>\n

      \uf0b7 If ventilation is poor an air fed hood or mask is essential, if any doubt whatsoever exists wear an airfed hood\/mask.<\/p>\n

      \uf0b7 Never filter spray mists through rags wrapped over the mouth. As the rags can get soaked and allow paint to come into direct contact with the mouth. The rags are also rather inefficient filters.<\/p>\n

      4) Ingestion<\/p>\n

      Food and drink should not be consumed, stored or prepared in areas where paint is stored or being applied.<\/p>\n

      In the case of accidental paint ingestion, medical attention should be obtained at once.<\/p>\n","protected":false},"excerpt":{"rendered":"

      NANOPOXY 500,\u00a0Antibiosis non-solvent epoxy coating used for drinking water supply steel pipe and drinking water tank interiors, is a newly invented 100% solid epoxy resin paint that has a fast \u201cdry through\u201d time as well as an excellent adhesion and durability. Also, this goods proportionate to FDA 21 CFR 175.300, KWWA A108 standard.
      \nUsed for interior of steel and concrete drinking water tanks ,Steel Structure etc.<\/p>\n","protected":false},"featured_media":2666,"template":"","meta":[],"_links":{"self":[{"href":"https:\/\/www.maziya.com\/index.php\/wp-json\/wp\/v2\/product\/2665"}],"collection":[{"href":"https:\/\/www.maziya.com\/index.php\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.maziya.com\/index.php\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.maziya.com\/index.php\/wp-json\/wp\/v2\/media\/2666"}],"wp:attachment":[{"href":"https:\/\/www.maziya.com\/index.php\/wp-json\/wp\/v2\/media?parent=2665"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}